Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to duplicate a Nice FLO2RE/FLOR-S remote control

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Let's see how to duplicate a Nice FLOR2R/FLOR-S remote control. We need to have an original remote control that works with charged batteries and functioning buttons.

We also need to perform the operation no more than 2/3 meters from the gate we need to open. On the new remote control (FLOR2R) we press and hold down the button we want to program for about 6 seconds; the LED light will start flashing.

On the old remote control (FLOR-S) we quickly press the button we normally use to open it three times, leaving a second of pause between each press. On the new remote control, we press the button we were programming briefly once.

We wait 10 seconds. The LED light will turn off, confirming that the programming has been successful.

We repeat the same procedure for the other button.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Nice Flor-s 2 key
How to replace the battery of the Nice Flor-s 2 key
(Various brands) Various Today we will explain how to replace the battery of the Nice Flor-s model 2 car remote control. To replace the key battery on your own, you need to o…
How to change the battery of the Nice FLO2RE remote control
How to change the battery of the Nice FLO2RE remote control
(Various brands) Various In this video we can see how to change the battery of the Nice remote control, which is an electronic device used to remotely control various automat…
How to duplicate a Nice gate remote control
How to duplicate a Nice gate remote control
(Various brands) Various This is the standard learning system for this type of remote controls, and it is called "rolling code." We need to have a properly functioning "maste…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos