Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you test car fuses with a multimeter?

Model: (Various brands) Various
Part: Fuse box

In a car, it is possible to test the functioning of a fuse using a multimeter: you will need to open the corresponding fuse box to access the fuses inside. Here, you should take the two probes connected to the multimeter and point one at the positive terminal and the other at the negative terminal: if the instrument indicates that current is flowing, it means that the fuse in question is functioning. If, however, it shows that there is no current flow, it means that the fuse is not working and must be replaced with one of similar amperage.

Posted on 18 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you test car fuses with a multimeter?
How do you test car fuses with a multimeter?
(Various brands) Various To perform a functional check of a fuse present in the car using a multimeter, you first need to locate the box containing the fuse in question. Next…
How do you test car fuses with a multimeter?
How do you test car fuses with a multimeter?
(Various brands) Various In order to test the fuses installed on any car using a multimeter, it will be necessary to open the corresponding fuse box to access the fuses to be…
How to Test Car Fuses with a Multimeter?
How to Test Car Fuses with a Multimeter?
(Various brands) Various You can test the functionality of the fuses installed in any car using a multimeter by opening the corresponding fuse box to access the fuses inside.…

    Frequently Asked Questions

    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos