Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove dents from the car body

Model: (Various brands) Various
Part: Body

Video tutorial

Removing dents from our car's body on your own is possible thanks to the Rhutthen DIY kit. The kit, which can be purchased online, contains a gun, thermoformable glue sticks, two extraction pins, a spatula, a twist knob, and a regulator bridge with two regulators.

You will also need a microfiber cloth and nail polish remover.

Let the hot gun start heating up while we clean the area to be treated with a cloth and some solvent. Unscrew the central twist knob of the bridge and choose the most suitable pin based on the dent.

Apply hot glue on the dent and place the extraction pin on it, holding it down for about 10 seconds. Position the regulator bridge and wait about 10 minutes before pulling firmly on the twist knob.

Using the solvent, remove the glue and residue with the spatula.


Posted on 11 January 2026 by ScegliAuto


Related tutorials

How to Repair Small Dents on the Bodywork
How to Repair Small Dents on the Bodywork
(Various brands) Various In this video, see how to repair small dents on the plastic bodywork of your vehicle without needing to go to a body shop. These are dents that may h…
Repairing Dents with a Dent Puller (or Glue Puller)
(Various brands) Various Repair bodywork dents, small dings, and imperfections DIY in just a few minutes. …
Repairing Car Dents from Hail
Repairing Car Dents from Hail
(Various brands) Various In this video, we will explore one of the many options available for repairing common damage caused by hail on a generic car. First, obtain a dent re…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos