Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set Daily Rest on the Digital Tachograph

Model: (Various brands) Various
Part: Checks and maintenance

In this video, we can see how to set daily rest on the digital tachograph: with the card inserted, press button number 1 a couple of times until the bed icon appears, then choose the country using the up arrow, and hold button number 1 until the card is ejected. You need to check where button number 1 is positioned: if it is on "hammers", which means "other work", it is not correct, press again until the bed icon is displayed and leave it on this display, so that when the next day you insert the card again, it will have recorded all that time as a break.

Posted on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Record Rest Periods on a Digital Tachograph
How to Record Rest Periods on a Digital Tachograph
(Various brands) Various Regulations require professional drivers to document 24 hours of activity on their tachograph card. When on the vehicle, you must keep your smartcard…
How to Change the Time on a Siemens VDO Digital Tachograph
How to Change the Time on a Siemens VDO Digital Tachograph
(Various brands) Various The process for changing the time on a Siemens VDO digital tachograph may vary slightly depending on the model and version of the tachograph. However…
How to Set the Daily Time on the VDO Tachograph
How to Set the Daily Time on the VDO Tachograph
(Various brands) Various In this video, we will see how to set the daily time on the VDO tachograph of a van. Press the button located on the right side of the device while s…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos