Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shock Absorbers on a Car?

Model: (Various brands) Various
Part: Shocks

Video tutorial

Over time, the shock absorbers on a vehicle tend to wear out, so it is necessary to replace them. They have a predetermined lifespan based on the vehicle model, but this aspect can vary greatly depending on the roads you drive daily, whether they are more or less bumpy, and so on. The video guide above quickly shows how to perform the job. Lift the vehicle, remove the wheels, and unscrew the locking pins at both ends, pulling the shock absorber out of its seat.

Clean the area well, then proceed with the installation of the new one.


Posted on 13 March 2026 by ScegliAuto


Related tutorials

How and when to check the shock absorbers?
How and when to check the shock absorbers?
(Various brands) Various Approximately 45% of new cars on the road already have fully worn shock absorbers. This is because after just 12,000 miles, the shock absorbers have …
What You Need to Know About Shock Absorbers
What You Need to Know About Shock Absorbers
(Various brands) Various Many underestimate the importance of having worn shock absorbers, yet they are a crucial element for safety. Over time and mileage, they become less …
Common Mistakes When Replacing Shock Absorbers
Common Mistakes When Replacing Shock Absorbers
(Various brands) Various Here is a list of the 5 most common mistakes regarding shock absorber replacement. Mistake number 1: choosing the wrong replacement part. Shock absor…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos