Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and when to check the shock absorbers?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Approximately 45% of new cars on the road already have fully worn shock absorbers. This is because after just 12,000 miles, the shock absorbers have undergone 21 million compression and extension cycles.

Therefore, it is very important to check the shock absorbers every 12,000 miles. Until a few years ago, many garages performed a test to check if the shock absorbers were still efficient by pushing down on the corners of the bodywork.

However, this test is not very effective and can compromise the situation. The only reliable test is the drive test, where you can check if the front of the car dips during braking and the car does not slow down immediately.

If there is a transfer of load to the rear, ensure that the car does not lose grip during sudden direction changes. Check if the steering wheel wobbles at high speeds, requiring constant corrections.

Lastly, check if the front tyres are wearing unevenly. All these signs are caused by worn shock absorbers.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

What You Need to Know About Shock Absorbers
What You Need to Know About Shock Absorbers
(Various brands) Various Many underestimate the importance of having worn shock absorbers, yet they are a crucial element for safety. Over time and mileage, they become less …
Common Mistakes When Replacing Shock Absorbers
Common Mistakes When Replacing Shock Absorbers
(Various brands) Various Here is a list of the 5 most common mistakes regarding shock absorber replacement. Mistake number 1: choosing the wrong replacement part. Shock absor…
How and When to Replace Shock Absorber Springs?
How and When to Replace Shock Absorber Springs?
(Various brands) Various When replacing the shock absorbers, it is advisable to have the shock absorber springs checked and possibly replaced as they are responsible for supp…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos