Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Headlamp Bulb of the Car

Model: (Various brands) Various
Part: Tail light bulb

Replacing the rear headlamp bulbs of the car? Open the boot to access the headlamp. Use a screwdriver to remove the securing screws located at the side of the headlamp. Disconnect the rear headlamp from its housing once all screws are removed and disconnect the power connectors. Replace the damaged bulbs with new ones (same size and voltage). Refit the rear headlamp above the car's body, tightening all screws at the side. Test the correct operation of the previously fitted bulbs. Get into the vehicle and turn on the operating levers.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Replacing the bulb of the left rear headlight of the car is a very simple and quick operation to perform independently, and this operation is similar…
(Various brands) Various Changing the front headlight bulb on a Piaggio SI is a straightforward task. You will need a 43x15 mm 6V 15W bulb and a Phillips screwdriver. Start b…
(Various brands) Various (2005-2015 / ) Replacing the rear light bulb on a vehicle is very simple; this maintenance task can be performed in a few minutes and independently. Today, I will e…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos