Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Speedometer and Rev Counter Bulbs

Model: (Various brands) Various
Part: Light bulb

Video tutorial

In today's tutorial, you will learn how to remove and replace the bulbs of the speedometer in a generic car, in this case, a Honda Civic. First, get inside the car and remove the speedometer: unscrew the top screw with a screwdriver and take off the plastic trim; then unscrew the remaining screws to extract the entire cluster, disconnecting the electrical connectors.

Now you can remove the burnt-out bulbs by pulling them out of the holder; replace them with new ones that have the correct fitting, and then reassemble everything.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How Does the Speedometer Work?
How Does the Speedometer Work?
(Various brands) Various The speedometer is a device used to record the instantaneous speed or the average speed detected over a specific period. The motorcycle speedometer, …
How to Reset the Service Light on an Aixam?
How to Reset the Service Light on an Aixam?
(Various brands) Various To reset the Service light on an Aixam, press and hold the buttons located on the right and left of the instrument panel, just below the speedometer …
How to Install a Rev Counter?
How to Install a Rev Counter?
(Various brands) Various To install a rev counter in the car, first position the device next to the instrument cluster and secure it in place. Once the device is inserted, co…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos