Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Rev Counter?

Model: (Various brands) Various
Part: Checks and maintenance

To install a rev counter in the car, first position the device next to the instrument cluster and secure it in place. Once the device is inserted, connect the cables to the appropriate sockets found in the fuse box, following the instructions in the video. After connecting these cables, also connect the cable to the engine speed sensor, which will be located inside the engine bay. This will allow you to verify that the device functions correctly.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Aixam?
How to Reset the Service Light on an Aixam?
(Various brands) Various To reset the Service light on an Aixam, press and hold the buttons located on the right and left of the instrument panel, just below the speedometer …
How to Set the Clock on the Kawasaki Ninja 300
How to Set the Clock on the Kawasaki Ninja 300
(Various brands) Various If you need to change the time on the display of your scooter, refer to the instructions in this description and you can also use the video for assis…
How to replace the joint of the tie rod axis
How to replace the joint of the tie rod axis
(Various brands) Various Today we will explain how to replace the tie rod joint. To carry out the replacement, we need to work safely, so we must park the vehicle on level gr…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos