Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Bulb on Scania R450

Model: (Various brands) Various
Part: Headlight bulb

Open the front protection door to access the headlamp. Unscrew the three Torx screws that secure the unit: two are located in the centre of the bonnet (one high and one low) while the other is well hidden and is located on the side, above the headlamp (see video). At this point, lever behind the housing to remove it from its seat. Unscrew the screws that secure the rear cover of the headlamp, disconnect the connector, and move the metal clip that holds the Xenon bulb in place. Proceed in reverse for reassembly. As you can see, this is a very simple operation. Good luck!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Scania R450 located?
(Various brands) Various The fuses of the Scania R450 are located inside the only fuse box that is installed inside the vehicle: in this type of car, this box can be found in…
Replacing the Headlight Bulb on a Scania R370
Replacing the Headlight Bulb on a Scania R370
(Various brands) Various To replace the dipped beam bulb on a Scania R370, first open the lower section of the central grille, which has the "R370" inscription. Using a Torx …
How to Replace the Headlight Bulbs on a Scania G 450?
How to Replace the Headlight Bulbs on a Scania G 450?
(Various brands) Various In this tutorial, see how to replace the front headlight bulbs on a Scania G450, a very simple and quick operation. First, ensure the key is not inse…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos