Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights of the Car

Model: (Various brands) Various
Part: Tail light

How do you remove the rear lights of the car? Let's see how to take off the rear light from the bodywork of the car. Lift the tailgate of the boot, unscrew the securing screws located at the side of the light with a screwdriver (remove the cover at the side). Many cars have the removal from behind the light (boot side). Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Test the correct operation of all lights of the headlamps at the end of the installation.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Reasons why the tail lights work but the brake lights do not
Reasons why the tail lights work but the brake lights do not
(Various brands) Various There are several reasons why the rear lights work and the brake lights do not, or vice versa. In older cars, the brake lights and the rear lights us…
How to permanently remove moisture from the rear lights
How to permanently remove moisture from the rear lights
(Various brands) Various We know how annoying it is, after a period of heavy rain, to find the rear lights holding moisture inside. We then remove the optical group from its …
Electrical Connection for Tow Bar
Electrical Connection for Tow Bar
(Various brands) Various In this video, we will see how to install a tow bar for the car, describing the mechanical part, which involves (and varies depending on the model of…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos