Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wheel Bearing

Model: (Various brands) Various
Part: Bearing

Let's look at replacing the front wheel bearing of the car. Lift the car with a jack, remove the wheel to access the wheel hub. Undo the bolts of the caliper bracket and detach it, then undo the bolts of the brake disc and detach it from the wheel hub. Next, use pliers or a screwdriver to remove the central hub cap. Loosen the large bolt with a socket spanner. Completely remove the wheel hub from the car with the upper pin and pull out the bearing. Fit the new bearing onto the front wheel hub. After assembling the parts, all that remains is to fit the wheel.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How Does an Internal Bearing Puller Work?
How Does an Internal Bearing Puller Work?
(Various brands) Various A car bearing puller is a tool designed to facilitate the removal of a vehicle's bearing. But how do you use it? Simply insert it into the bearing an…
If You Hear a Loud Rolling Noise, It Could Be a Bearing
If You Hear a Loud Rolling Noise, It Could Be a Bearing
(Various brands) Various If you hear a loud rolling noise inside the cabin, you might have a problem with a wheel bearing or the wheel itself. Try running your hand over the …
How to Replace the Wheel Bearing Without Removing the Hub
How to Replace the Wheel Bearing Without Removing the Hub
(Various brands) Various To change the bearing without removing the hub, apply the handbrake and put the car in first gear, then loosen the hub nut as shown in the video. Con…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos