Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Microcar MC1 (Lombardini Engine)

Model: (Various brands) Various
Part: Timing belt

In this guide, you will discover the essential steps to remove and replace the timing belt on a Microcar MC1 with a Lombardini engine, in this case with the engine disassembled. First, remove the timing cover from the engine; then loosen the tensioner to remove and replace the timing belt. Next, install the new belt correctly, ensuring not to alter the engine timing; before tightening everything, manually rotate the engine to verify that everything has been assembled perfectly!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Microcar MC1
(Various brands) Various Resetting the service light for maintenance on a Microcar MC1 is a straightforward task you can do yourself. The first step is to open the driver's d…
How to replace the timing belt of the Euorocomah
How to replace the timing belt of the Euorocomah
(Various brands) Various The timing belt on a Eurocomah 16q work vehicle is located inside the engine compartment, near the fuel pump and the engine. To replace the timing be…
When should the car's timing belt be replaced?
When should the car's timing belt be replaced?
(Various brands) Various The timing belt or timing chain is used to synchronize the pistons with the valve opening, so if the car has a faulty timing belt or chain, the engin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos