Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb

Model: (Various brands) Various
Part: Headlight bulb

How to replace the front headlamp bulbs of your car? Follow these steps to change the bulbs. Lift the cover of the engine compartment and secure it. Locate the inspection cap of the headlamp if present (located at the rear of the headlamp). Inside the headlamp, you will find the bulb holders and the bulbs. Disconnect the bulb holders from the headlamp and remove the damaged bulbs. Fit the new bulbs and insert the bulb holders back into the headlamp housing. Test the operation of the new bulbs fitted in the front headlamps.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Bulb on a Piaggio
How to Change the Bulb on a Piaggio
(Various brands) Various Changing the front headlight bulb on a Piaggio SI is a straightforward task. You will need a 43x15 mm 6V 15W bulb and a Phillips screwdriver. Start b…
How to replace the front headlight bulb on Peugeot Partner and Citroen Berlingo vehicles
How to replace the front headlight bulb on Peugeot Partner and Citroen Berlingo vehicles
(Various brands) Various Today we will explain how to replace the headlight bulb of Citroen Berlingo and Peugeot Partner vehicles. We start the replacement by opening the fro…
Replacing the Front Position Light on the Yaris
Replacing the Front Position Light on the Yaris
(Various brands) Various Want to replace the front bulbs on the Toyota Yaris? Here’s how to replace the front headlight bulbs. Lift the engine cover bonnet and secure it. Loc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos