Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Position Light on the Yaris

Model: (Various brands) Various
Part: Headlight bulb

Want to replace the front bulbs on the Toyota Yaris? Here’s how to replace the front headlight bulbs. Lift the engine cover bonnet and secure it. Locate the inspection cap of the headlight (located at the back of the headlight). Inside the headlight, you will find the bulb holders and the illumination bulbs. Pull out the bulb holders from the headlight and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs and insert the bulb holder back into the headlight housing. After replacing, close the front bonnet and test the lights.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing a Faulty Interior Light from the Car
Removing a Faulty Interior Light from the Car
(Various brands) Various Let's see how to remove a faulty, broken interior light from the car. Use a screwdriver to pry between the light lens and the plastic edge (without b…
How to replace the rear headlight bulb of a car
How to replace the rear headlight bulb of a car
(Various brands) Various Replacing the bulb of the left rear headlight of the car is a very simple and quick operation to perform independently, and this operation is similar…
How do you correctly install an H7 LED bulb
(Various brands) Various In this short video, we can see the correct way to install an H7 LED bulb: first, we remove the halogen bulb from its housing by rotating it counterc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos