Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Calibrate the LPG System

Model: (Various brands) Various

To carry out this operation, you will need a computer with specific software, mainly provided to workshops specialising in the installation of LPG systems. This computer will have a cable that you will connect to the LPG system's control unit. Once this step is complete, the computer will detect the presence of the LPG system. Next, you must select the type of LPG system installed and the manufacturer's brand. By doing this, the computer will automatically detect all the characteristics and recommended specifications for that particular model. Once the computer has detected all the characteristics of the system, start the engine and let it idle. This will allow you to observe how the engine reacts to LPG, and using the data collected by the computer, you will adjust it accordingly.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the LPG Cylinder in Cars
How and When to Replace the LPG Cylinder in Cars
(Various brands) Various This video tutorial explains how and when it is necessary to replace the LPG cylinder in cars. First, you need to know that if the LPG system is fact…
When to Change the Filters in a LPG System
When to Change the Filters in a LPG System
(Various brands) Various A legitimate concern for those driving a dual-fuel petrol/LPG vehicle is when to change the filters, of which there are three in this type of system:…
How to Keep a LPG System in Good Condition
How to Keep a LPG System in Good Condition
(Various brands) Various In this video, let's see how to keep an LPG system in good condition; the operations are few. At every service of the vehicle, a filter needs to be r…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos