Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear wiper

Model: (Various brands) Various
Part: Windshield wipers

This guide will show you the correct steps to remove the rear wiper from your vehicle. First, you need to access the part connected to the movement mechanism, which is the base of the wiper. Lift the plastic cover as shown in the video at minute 0:08. Once the cover is lifted, you will see the bolt that connects the wiper to the car; take an appropriate tool, such as a socket spanner, and unscrew the bolt. Finally, pull the wiper towards you, sliding it out until it is removed.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting the Rear Wiper Blade
Fitting the Rear Wiper Blade
(Various brands) Various Is the rear wiper blade of your car broken? Let's see how to remove the rear blade. Grasp the front wiper blade with your hands and gently pull it of…
How to Replace the Rear Wiper Blade on a Car
How to Replace the Rear Wiper Blade on a Car
(Various brands) Various When you notice that the rear wiper blade is noisy and not cleaning properly, it is likely the arm that needs replacing rather than the blade itself.…
How to Replace Windscreen Wiper Blades
How to Replace Windscreen Wiper Blades
(Various brands) Various Remove the windscreen wiper blades from your car. Start by lifting the wiper arm away from the windscreen. Grasp the wiper blade (to be replaced) wit…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos