Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this guide we will see how to replace the clutch return spring on a Ford Focus. To start, we need to remove the panel located under the steering wheel; once removed, we will need to disconnect the hood opening cable and the diagnostic cable (circled in red in the video). For better access to the pedal area it is advisable to remove the driver's seat. Once these preparatory procedures have been carried out, it is necessary to unscrew the 4 nuts of the brake-clutch block (two upper and two lower). At this point it will be possible to act on the spring; let's slide it out, pushing it backwards to detach the hook and remove it. Let's replace it with the new one, making sure that the hook fits well into the space provided, both the rear one and the one on the pedal (shown at minute 1: 10). At the end of this operation it will be possible to proceed with the reassembly, making sure that all the bolts and cables are correctly put back in their place.
Posted on 22 March 2024 by ScegliAuto
How to replace the clutch pedal spring on the Saab 9-3.
(Various brands) Various (2002-2014 / ) In this short and simple guide, we will see how to disassemble and replace the clutch pedal return spring of the Saab 9-3. First, we get into the car
How to remove the clutch of a scooter?
(Various brands) Various Once the clutch unit of the scooter has been disassembled it is necessary to proceed as follows: pay utmost attention when opening the clutch unit be
How to recognize the symptoms of a clutch to change.
(Various brands) Various A clutch can be operated in three ways: the first is that the pedal is placed directly on the cable, the second that there is an oil pump that squeez Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.091
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |