Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In order to replace the front shock absorber of a Fiat group car it is necessary to: remove the wheel after lifting the car, first remove the upper support plate of the shock absorber, then remove all the wiring and the 10 mm nut that holds it the brake hoses which are located above the brake disc. Use some unscrew to loosen the two screws that hold the shock absorber to the spindle, at this point the shock absorber is free and can be extracted. Then take the kit that allows you to keep the coils of the spring under tension and tension the spring itself. Then remove the nut that locks the spring to the shock absorber (buffer, bearing and plate) so as to be able to extract the shock absorber from the spring. Take the new shock absorber and the new dust cover and reposition the plate with its bearing and buffer, tighten the nut again and then loosen the spring tension kit. At this point repeat all the operations backwards to reassemble all the components.
Posted on 1 May 2024 by ScegliAuto
What you need to know about shock absorbers.
(Various brands) Various Many people underestimate the importance of having worn-out shock absorbers, while they are actually a fundamental element for safety. In fact, over
What are the most common mistakes in replacing shock absorbers?
(Various brands) Various Here is a list of the 5 most common errors regarding the replacement of shock absorbers. Error number 1 is choosing the wrong replacement. Shock abso
How and when to replace shock absorber springs?
(Various brands) Various During the replacement of shock absorbers, it is advisable to have the coil springs checked and possibly replaced as they are responsible for support Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.081
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |