Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Pin Quickly

Model: (Various brands) Various
Part: Ignition coil

Video tutorial

When maintaining various components of the car, it is known that removing pins can take a lot of time, as they tend to rust due to age and wear, making extraction difficult. Various solutions such as liquids, sprays, and cleaners suitable for rusted pin removal can be used.

With the help of AutoDoc, we will reveal a little secret on how to remove pins without using additives. Start by adding two nuts to the pin and tighten them as close together as possible using a spanner and a combination wrench.

At that point, using the spanner, remove the first nut, and with your hands, you can remove the pin using the second nut as a head.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Stand on the Aprilia Sportcity
How to Remove the Centre Stand on the Aprilia Sportcity
(Various brands) Various If you want to remove the centre stand on this motorcycle, you can follow the instructions provided in this video and also use the description below.…
How to Replace the Lock Cylinder of a Car?
(Various brands) Various The video in question, which is brief and features verbal commentary from the presenter, clearly helps you carry out the described task. When you ope…
How to Remove the Front Wheel of My Motorcycle?
How to Remove the Front Wheel of My Motorcycle?
(Various brands) Various Removing the front wheel of a motorcycle is much easier than the rear wheel. This brief guide shows you how to do it in simple steps. The procedure m…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos