Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel of My Motorcycle?

Model: (Various brands) Various
Part: Wheel

Video tutorial

Removing the front wheel of a motorcycle is much easier than the rear wheel. This brief guide shows you how to do it in simple steps.

The procedure may vary slightly depending on the model, but generally, it will be similar. First, position your motorcycle on the centre stand and start by removing the screws of the front brake caliper, also removing the screws on the forks.

After removing the calipers, unscrew the central bolt of your wheel using a socket spanner. Now, simply slide out the central axle and remove the front wheel.

Remember to grease the central area of the axle well before refitting.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

I Accidentally Put Petrol in My Diesel Car, What Should I Do? Do I Need to Empty the Tank?
I Accidentally Put Petrol in My Diesel Car, What Should I Do? Do I Need to Empty the Tank?
(Various brands) Various If you accidentally refuelled your car with petrol instead of diesel, the most important thing is, as soon as you realise, not to start the car. Doin…
How to remove the rear wheel of the Tmax 500
How to remove the rear wheel of the Tmax 500
(Various brands) Various To remove the rear wheel of the motorcycle, proceed as follows: use a socket wrench to loosen the rear wheel axle (left side of the motorcycle). Take…
How Can I Install the Octo Telematics Device in My Car?
How Can I Install the Octo Telematics Device in My Car?
(Various brands) Various To install the Octo Telematics electronic device in your car, first open the front bonnet. Start by loosening the positive and negative terminals of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos