Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rivets from the Number Plate Holder

Model: (Various brands) Various

In today's video, see how to remove the rivets and detach the number plate holder from a Ducati Panigale. First, get a standard pair of pliers. Start by removing the clips that hold the number plate in place, then take it off. Now, remove the rear part of the seat and take the key. Use it to unscrew the number plate holder, specifically the four fixing screws. Pull it away now, being careful to disconnect the light from the item in question. At this point, the operation will be complete. This is useful if you want to go on track or replace it with a more sporty unit.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting the Rear Number Plate Holder on Our Car
Fitting the Rear Number Plate Holder on Our Car
(Various brands) Various Do you have the number plate holder in pieces? Let’s see how to replace the rear number plate holder on the car. Remove the securing screws of the nu…
How to Fit a Number Plate Using a European Number Plate Holder
How to Fit a Number Plate Using a European Number Plate Holder
(Various brands) Various Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in t…
Removing the Number Plate Holder from a Car
Removing the Number Plate Holder from a Car
(Various brands) Various In this video, you will learn how to remove the number plate along with the number plate holder from a car. First, remove the number plate: if it is …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos