Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Windscreen Wiper Motor.

Model: (Various brands) Various
Part: Windshield wipers

In this video, you can see the steps to dismantle and subsequently repair the windscreen wiper motor of the car. First, you need to know that the wiper motor is located under the windscreen; if it is damaged and you need to remove it for replacement or repair. First, remove the seal from the edge of the plastic cover, then take off the protective caps; underneath you will find nuts that need to be undone (use a 13 mm spanner) to remove the wiper arms. At this point, remove the wiper arms. Next, you need to remove the plastic ring located under the windscreen; using a screwdriver, undo the screws. Once the ring is removed, you can access the wiper motor and take it out of its housing.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Repairing the Windscreen Wiper Motor
Repairing the Windscreen Wiper Motor
(Various brands) Various To repair the wiper motor, once it is removed from the engine bay, follow the instructions below for the work to be carried out. Often, the malfuncti…
How to repair a cracked windshield washer fluid tank
How to repair a cracked windshield washer fluid tank
(Various brands) Various In this video we can see a very simple and inexpensive method to repair the windshield washer fluid tank of our car, which has suffered a small damag…
How to repair the TPMS valve stem
How to repair the TPMS valve stem
(Various brands) Various In this video we can see how to repair the stems of TPMS valves, when the aluminum they are made of has corroded, without having to remove the tire o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos