Do it yourself
Frequently asked questions about cars and motorcycles

Repairing the Windscreen Wiper Motor

Model: (Various brands) Various
Part: Starter motor

To repair the wiper motor, once it is removed from the engine bay, follow the instructions below for the work to be carried out. Often, the malfunction is due to oxidation on the electrical contacts. To check if the motor is functioning correctly, use a multimeter. If the voltage measured is around 12 V, then the motor is operational. Therefore, the issue may be with the speed switch and the oxidation of the contacts and wires, necessitating a review of the electrical connections.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, you can see the steps to dismantle and subsequently repair the windscreen wiper motor of the car. First, you need to know that the wip…
(Various brands) Various In this video, we will see one of the many methods that will allow you to repair a windscreen or any chipped glass on a generic car. Various glass re…
(Various brands) Various In this video, we can see how the YouTuber demonstrates replacing Bosch wiper blades. Specifically, this involves the budget model of wiper blades pr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos