Do it yourself
Frequently asked questions about cars and motorcycles

How to Install H4 LED Bulbs

Model: (Various brands) Various
Part: Light bulb

Today, you will learn how to install H4 LED bulbs. After obtaining the installation kit that includes the two H4 LED bulbs, lift the front cover of the engine compartment and locate where the bulbs you will be replacing are positioned. Usually, the cover caps are round or rectangular. At this point, move the metal lever to release the cover cap, reach in and locate the bulb holder, press the two tabs to release the old bulb. Take your new LED bulb and attach it to the bulb holder, then connect the connector to the bulb, close the cap, and you're done.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, we are presented with high-quality LED bulbs from a well-known brand, H7 and H4, which can be installed in our cars without the need f…
(Various brands) Various In this video we see how to install H7 bulbs correctly: first of all, to remove the bulb we will need to unlock the spring and remove the H7 halogen …
(Various brands) Various When replacing halogen bulbs with LED ones, the dashboard light comes on: the electronic control unit monitors the status of the bulbs by measuring t…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos