Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Problems Can Diesel Injectors Have?

Model: (Various brands) Various
Part: Fuel injectors

What happens if the injector leaks into the cabin? It means that the injector is venting because the copper sealing ring is no longer holding. In fact, residues of unburnt diesel accumulate on this ring, and in the engine, then from there into the cabin, acrid exhaust gas smells are created. Obviously, this gas is very harmful to our lungs. This unpleasant smell is accompanied by a very annoying metallic noise and an increase in fuel consumption. What is the solution? It is to replace this copper gasket after cleaning and descaling the injector, of course. Here the YouTuber shows us the already cleaned injector housing. Naturally, the longer you ignore these warnings, the more difficult it will be to extract the injector, which will be more caked, as unburnt diesel vitrifies and thus becomes practically a single block, and at that point, it will also be necessary to replace the injector.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to top up AdBlue on a diesel vehicle.
How to top up AdBlue on a diesel vehicle.
(Various brands) Various When the AdBlue warning light comes on in a diesel vehicle, it means that it is necessary to top up the liquid inside the tank. We open the diesel do…
DPF and FAP Issues
DPF and FAP Issues
(Various brands) Various If the question is: can FAP and DPF systems be removed from a diesel car? The answer is "NO"; it is absolutely illegal, unless done for sporting purp…
How do you clean the Adblue injectors?
How do you clean the Adblue injectors?
(Various brands) Various Over time, like any fuel injection system in cars, even the adblue injectors tend to get dirty and clogged. To overcome this inconvenience, we have a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos