Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an Amplified Antenna on a Car

Model: (Various brands) Various
Part: Antenna

Video tutorial

To connect an amplified antenna (booster) for a car radio, you need to remove the radio from the dashboard slot and locate the antenna connection cable with the corresponding adapter. Disconnect the cable from the radio and connect the male adapter of the amplified antenna.

Then connect the female adapter of the amplifier to the cable coming from the vehicle. Next, locate the red wire from the amplifier and connect it to the vehicle's terminal block along with the other existing red wire using a double connector.

Finally, reinstall the radio.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Car Antenna
How to Replace the Car Antenna
(Various brands) Various Replacing the car antenna is almost always a very simple process, and you can easily find universal antennas online that can be fitted to nearly all …
How to Fit a Shark Fin Antenna on Your Car
How to Fit a Shark Fin Antenna on Your Car
(Various brands) Various To fit the shark fin antenna cover, use black silicone. Before fitting the cover, ensure that the antenna wires and microchips are not damaged. After…
How to Replace the Antenna
How to Replace the Antenna
(Various brands) Various Performing this task will not be complicated at all, as you will not need any special tools. Just follow this simple and quick guide. First, locate t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos