Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a 2 Din Car Radio?

Model: (Various brands) Various
Part: Car stereo

This video guide, accompanied by the narrator's commentary, explains how to replace the existing car radio with a 2 din type. Begin by removing the old radio from the dashboard, unfastening it with the help of 4 clips from its mounting cage. Next, remove the dashboard trim, connect the new radio, make the electrical connections, and test the power on. At this point, trim any excess material from the dashboard trim, take measurements, and create a new custom frame, as shown in this example using carbon, with the help of an air sander. The final result will be perfect and visually appealing.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install a 2 Din Car Radio in a Vehicle?
How to Install a 2 Din Car Radio in a Vehicle?
(Various brands) Various This excellent video provides a verbal explanation and guides you step by step through the replacement of a 1 din car radio with a 2 din model. First…
Installing a Universal 2 DIN Car Radio
Installing a Universal 2 DIN Car Radio
(Various brands) Various In this guide, you'll find essential instructions for installing a universal 2 DIN car radio, with or without a display. First, remove the original r…
How to Perform a Factory Reset on a 2 Din Car Radio
How to Perform a Factory Reset on a 2 Din Car Radio
(Various brands) Various If your 2 din car radio is experiencing numerous and serious software issues, you will need to perform a factory reset to resolve everything quickly …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos