Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to repair the Fiat 1 3 multijet engine heat exchanger?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Engine
Operation: How to repair the Fiat 1 3 multijet engine heat exchanger?

Below we will see how to repair liquid (water) leaks from the water-oil exchanger of the turbine in the 1.3 multijet engines of the Fiat group: in order to extract the exchanger, it is first necessary to disassemble the wheel, the internal mudguard, drain the coolant system and remove the water pump. At this point it is necessary to replace the gasket and it will be necessary to purchase a new gasket (preferably an original Fiat group), disassemble the exchanger, clean the gasket seat and position the new one. Finally, reassemble all the components backwards.


Posted on 21 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - What problems does the Opel 1.5 Diesel engine have? Read Answer
    • Vari - What problems does the Opel 1.6 CDTI engine have? Read Answer
    • Vari - How are the PureTech engines performing? Read Answer
    • Vari - What problems do PureTech 1.2 engines have? Read Answer
    • Vari - How many kilometers can a Renault 1.5 dCi engine with 110 horsepower travel? Read Answer
    • Vari - What is the average lifespan of the 1.3 MultiJet engine? Read Answer
    • Vari - What problems does the 3.0 diesel engine have? Read Answer
    • Vari - What are the problems with the 1.6 TDCI 90hp engine? Read Answer
    • Vari - When the orange engine light turns on? Read Answer
    • Vari - What problems does the VAG 1.6 A288 engine have? Read Answer
    • Vari - What problems does the Fiat 1.3 MultiJet engine have? Read Answer
    • Vari - What problems does the 1.6 diesel engine of Volkswagen have? Read Answer
    • Vari - What problems does the Twin Air engine have? Read Answer
    • Vari - What problems does the Peugeot 1.2 Puretech engine have? Read Answer
    • Vari - What problems does the Volkswagen 1.6 TDI engine have? Read Answer
    • Vari - What problems are there with the PureTech 1.2 engine? Read Answer
    • Vari - How much does it cost to replace the car engine? Read Answer
    • Vari - How much does it cost to replace the engine? Read Answer
    • Vari - What are the 7 most common problems with the VW 1.4 TSI engine? Read Answer
    • Vari - What problems does the 2.2 diesel engine of Ssangyong present? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos