Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean Car Turbos

Model: (Various brands) Various
Part: Turbocharger

Is it possible to restore the full efficiency of a vehicle's turbos? Yes, it is. Today, with the help of this short video tutorial, you will learn how to recover turbo power without spending excessive amounts and in just a few steps. The first thing to do is to purchase a turbo cleaning additive and a power recovery additive online or at a spare parts shop. The liquid should be added to the fuel tank while the engine is warm. After that, drive the car for 50 minutes at high revs on the road. Next, you will need to add a second nanotechnology additive for power recovery into the engine oil.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Rubber Seals of the Car
How to Clean the Rubber Seals of the Car
(Various brands) Various When cleaning the interior of the vehicle, it is often forgotten to clean the inside of the rubber seals, which are usually only cleaned on the outsi…
How to clean the car parking sensor
How to clean the car parking sensor
(Various brands) Various In this guide, you will learn how to quickly and effectively clean your car's parking sensor. Before you begin, ensure the engine is off during the w…
How to Clean Car Injectors
How to Clean Car Injectors
(Various brands) Various Here’s how to clean car injectors. Lift the bonnet and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos