Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Rubber Seals of the Car

Model: (Various brands) Various
Part: Checks and maintenance

When cleaning the interior of the vehicle, it is often forgotten to clean the inside of the rubber seals, which are usually only cleaned on the outside with a damp cloth. Today, you will learn how to clean them easily without using products that could damage the vehicle's interior. To clean the seals, you can use a drill or electric screwdriver with a nozzle attached, over which you should place some adhesive tape or a small piece of cloth. Once the tape is in place, gently insert it inside the seal and clean everything as shown in the video.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Regenerate the Wiper Blade Rubber
How to Regenerate the Wiper Blade Rubber
(Various brands) Various How to regenerate the rubber of the wiper blades. WARNING: this can be done if the rubber wear is medium/low. If it is heavily worn, never compromise…
How to install a protective rubber seal on a wheel arch
How to install a protective rubber seal on a wheel arch
(Various brands) Various In this video we can see how to easily install an adhesive seal that effectively protects the wheel arches of our car from impacts and rubbing. It is…
How to clean the motorcycle fork
How to clean the motorcycle fork
(Various brands) Various Today we will explain how to clean the fork from the dirt that forms under the dust seals when the fork is compressed; to perform this operation we n…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos