Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Tank Float

Model: (Various brands) Various

In this video, you will learn how to replace the fuel tank float. To access the float housing, you need to remove the rear seats. Next, remove the carpet located under the seats by unscrewing the various fasteners. Now unscrew the cap that opens access to the tank float. Before unscrewing the float's collar, have a tray ready to catch any spills. Disconnect the sensor cable from the connector and unscrew the float. At this point, insert the new float and reassemble everything by reversing the steps.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

What to Do If There Is No Power to the Float Pump?
What to Do If There Is No Power to the Float Pump?
(Various brands) Various To understand why there is no power, first, you need to know how a float pump works. As shown in the video, a traditional float has three conductors …
How to Replace a Float on a Submersible Pump
How to Replace a Float on a Submersible Pump
(Various brands) Various Remove the submersible pump and place it on a stable surface. Using a suitable socket spanner, unscrew the nuts on the top cover and then remove the …
How to Replace the Toilet Float
How to Replace the Toilet Float
(Various brands) Various If you want to extend your DIY skills to home repairs, particularly in the bathroom, you can attempt to replace the toilet float when you notice wate…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos