Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio?

Model: (Various brands) Various
Part: Car stereo

Video tutorial

The procedure for this task is often very similar across vehicles, so in this case, a model has been chosen from the many available. In the Ford Fiesta Mk7, the car featured in our video, proceed as follows: Use a flathead screwdriver to lever the entire frame of the central display on the dashboard, releasing the perimeter clips.

Once this is done, move on to the perimeter frame of the car radio, which is also secured by plastic clips, completing the task by unscrewing all the Torx screws present on the frame of the car radio. The final step is to disconnect all the rear electrical connectors before removing it from the dashboard.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How do you remove the car radio from the car?
How do you remove the car radio from the car?
(Various brands) Various In the video tutorial uploaded here, we are shown how it is even possible to disassemble a car stereo with just two kitchen knives, in case there is …
How to Reset the MyLink Car Radio?
How to Reset the MyLink Car Radio?
(Various brands) Various In this tutorial, you will learn how to reset the MyLink car radio, which is equipped in many Chevrolet models. This operation can be performed as a …
How to turn off the Pioneer car radio
How to turn off the Pioneer car radio
(Various brands) Various The turning on and off of the Pioneer car radio are done through the use of the same button. To turn off the car radio, we need to press the gray but…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos