Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from a Vespa

Model: (Various brands) Various

If you need to remove the fuel tank from your motorcycle, follow the instructions below and refer to the video as well. First, lift the seat as the tank is located directly underneath. Use a socket spanner to remove the fastening nut of the seat, then proceed to unscrew the four bolts located on the sides of the tank using the same spanner. Next, disconnect the float connector and lift the tank out of the frame. Beneath the fuel tank is the oil tank, and take care to gently detach the fuel pipe.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Fuel Tank from Car
Removing Fuel Tank from Car
(Various brands) Various Today, you will learn how to remove the fuel tank from a generic car. The procedure does not vary much, so we will provide only the main instructions…
How to Remove the Fuel Tank from the Kawasaki Z750
How to Remove the Fuel Tank from the Kawasaki Z750
(Various brands) Various If you need to remove the fuel tank from the motorcycle, follow these instructions: you will need a 10 mm socket spanner. First, remove the seat by u…
Removing a Car Fuel Tank
Removing a Car Fuel Tank
(Various brands) Various In this video tutorial, you will see the main steps to remove a fuel tank from a generic car. First, lift the vehicle and unscrew all the bolts from …

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos