Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing a Car Fuel Tank

Model: (Various brands) Various

In this video tutorial, you will see the main steps to remove a fuel tank from a generic car. First, lift the vehicle and unscrew all the bolts from the fuel tank bracket, where present; then drain all the fuel from the tank and remove the fuel supply hoses, taking off any clips. At this point, remove any obstructions from the tank and, with the help of a hydraulic jack, lower the tank slowly. Then, refit the new tank, checking the condition of the fuel hoses.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Fuel Tank from Car
Removing Fuel Tank from Car
(Various brands) Various Today, you will learn how to remove the fuel tank from a generic car. The procedure does not vary much, so we will provide only the main instructions…
How to refill the AdBlue liquid inside the vehicle's tank
How to refill the AdBlue liquid inside the vehicle's tank
(Various brands) Various Today we will explain how to add AdBlue liquid to the corresponding tank located inside the car. The tank is located next to the fuel tank, so before…
How to Remove the Fuel Pump from the Tank
How to Remove the Fuel Pump from the Tank
(Various brands) Various How do you remove the fuel pump from the tank? Let's see how to take out the pump and replace it. Disconnect the battery cables, then remove the rear…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos