Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
This video shows us how to check the condition of our car's fuel pump and, if necessary, how to replace it. If your fuel pump needs to be replaced, you will first need to extract the fuel from the tank and remove the old fuel filter. Subsequently, you can move on to disassembling and extracting the fuel pump, using a bolt wrench. At this point, you can install the new fuel pump and the new fuel filter in your car, following the same (reverse) procedure as the disassembly. Start your car and you will see that it will be as good as new!
Posted on 28 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.081
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |