Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Tank from Car

Model: (Various brands) Various

Today, you will learn how to remove the fuel tank from a generic car. The procedure does not vary much, so we will provide only the main instructions for removal. First, remove any hose clips connecting the tank to the fuel pump: once the hoses are disconnected, drain any residual fuel and empty the tank completely before removing it. At this point, unscrew the various bolts of the tank bracket and, using a hydraulic jack, gently lower the tank!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing a Car Fuel Tank
Removing a Car Fuel Tank
(Various brands) Various In this video tutorial, you will see the main steps to remove a fuel tank from a generic car. First, lift the vehicle and unscrew all the bolts from …
How to Remove the Fuel Pump from the Tank
How to Remove the Fuel Pump from the Tank
(Various brands) Various How do you remove the fuel pump from the tank? Let's see how to take out the pump and replace it. Disconnect the battery cables, then remove the rear…
How to Replace the Fuel Pump in Your Car
How to Replace the Fuel Pump in Your Car
(Various brands) Various This video shows how to check the condition of your car's fuel pump and, if necessary, how to replace it. If your fuel pump needs replacing, you must…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos