Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to refill the AdBlue liquid inside the vehicle's tank

Model: (Various brands) Various
Part: Checks and maintenance

Today we will explain how to add AdBlue liquid to the corresponding tank located inside the car. The tank is located next to the fuel tank, so before refilling we must open the fuel cap and then turn the blue cap counterclockwise. After removing the cap, we remove the funnel from the container and pour the liquid into the tank through the funnel. When we have finished, we close the tank cap, close the door, and start the car so that it can reset the warning light on its own.

Posted on 26 June 2025 by ScegliAuto

Video tutorial

Related tutorials

What to Do When the AdBlue Warning Light Comes On?
What to Do When the AdBlue Warning Light Comes On?
(Various brands) Various What to do when the AdBlue warning light comes on? When the AdBlue light illuminates and starts flashing, it means that the fluid in the designated r…
How to prevent AdBlue from crystallizing inside the tank?
How to prevent AdBlue from crystallizing inside the tank?
(Various brands) Various All diesel vehicles are equipped with a tank containing AdBlue, an additive necessary to reduce the emissions of nitrogen oxides in exhaust gases. Ho…
How to Top Up AdBlue Fluid?
How to Top Up AdBlue Fluid?
(Various brands) Various Maintaining the AdBlue tank and topping it up is a very easy task to do yourself, thanks to our short video tutorial. The first step to top up the Ad…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos