Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Window Crank

Model: (Various brands) Various
Part: Car door

If your vehicle still has manual window cranks and you need to remove the door panel, first remove the crank itself. You can find the instructions in the description below and use the video images for assistance. Once the door is open, get two small screwdrivers to gently pry and extract the crank. Once it is partially loosened, proceed to remove the steel retaining clip behind it and finally take it off completely.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video we can see an operation that is becoming less and less likely to occur, that is, the need to remove the crank of the rear window of a c…
(Various brands) Various Need to remove the external door handle of the car? Start by prising it off from above the door. Use a plastic or metal lever to pry between the wind…
(Various brands) Various In this video we can see how to reset the electric windows of our car. The system is valid for almost all car models with electric window control. If…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos