Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheels on a Vespa PX When Changing Tyres

Model: (Various brands) Various
Part: Wheel

In this video tutorial, see how to replace the wheels on a Vespa PX when changing tyres. First, clean the rims with a universal cleaner and a microfiber cloth, finishing with a liquid wax for a protective finish. Next, adjust the tyre pressure using a compressor with a gauge: the front tyre should be at 1.3 bar, the rear at 1.8 bar, and if riding two-up, set to 2.3 bar; the spare tyre should also be at 2.3 bar. Before laying the Vespa down, close the fuel tap to avoid clogging the carburettor. Using a 13mm spanner, remove the wheel cover; also remove the spare wheel. Spray some penetrating fluid on the nuts and loosen them. At this point, remove the wheel and clean the threads with a wire brush. Fit the new wheel and reassemble all parts in reverse order.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of a Vespa
How to Remove the Front Wheel of a Vespa
(Various brands) Various In this video, you will learn how to remove the front wheel of a Vespa. First, position the Vespa in a way that allows you to comfortably remove the …
Removing the Rear Wheel of the Vespa PK
Removing the Rear Wheel of the Vespa PK
(Various brands) Various To proceed with the DIY removal of the rear wheel on this scooter, follow the instructions in this video and the description provided below. First, l…
How to Rotate Tyres
How to Rotate Tyres
(Various brands) Various What is the procedure for rotating tyres? The basic procedure is to loosen the wheel nuts while the car is still on the ground, then lift the car and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos