Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Properly Install New Spark Plugs in the Car

Model: (Various brands) Various
Part: Spark plugs

Video tutorial

In this video tutorial, you can see how to properly install new spark plugs in the car. The first thing to do is to get in the vehicle and engage the handbrake, then pull the lever to lift the bonnet; once the bonnet is raised, secure it with the appropriate prop.

Prepare a torque wrench to tighten the spark plugs accurately, otherwise, they may be damaged (each tightening torque corresponds to a tightening angle); for the flat seat spark plug of 14 mm, the correct tightening torque is 25 Nm. If you do not have a torque wrench, a tightening angle of 180° to 240° is required.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Removing Car Spark Plugs
Removing Car Spark Plugs
(Various brands) Various In the following video tutorial, you will see the main steps to remove the spark plugs from a generic car: the procedure may vary from car to car, bu…
How to Replace Glow Plugs on a Vehicle?
How to Replace Glow Plugs on a Vehicle?
(Various brands) Various Glow plugs, as we specify, serve to preheat the air in the cylinders, allowing for combustion with diesel and thus starting the engine. If they are n…
Removing Car Spark Plugs
Removing Car Spark Plugs
(Various brands) Various Want to remove the spark plugs from your car? Let's look at removing damaged spark plugs and fitting new ones. Pull the lever to open the engine bay …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos