Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on the Nissan Caravan

Model: (Various brands) Caravan
Part: Tail light

To replace the rear light on this vehicle, follow the instructions and steps outlined below for a proper replacement. After opening the boot, locate the light unit to be removed and identify the two screws on the inside of the light using a screwdriver. Then, pull the light unit towards you while being careful to disconnect the power connector located at the back. Next, take the new light unit and position it after connecting the power connector, then refit the two screws.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Ignition Switch on a Dodge Caravan
How to Replace the Ignition Switch on a Dodge Caravan
(Various brands) Caravan (2011-2018 / ) If the ignition key tends to jam, it is likely that the ignition lock or some of its components have worn out. Made of brass or aluminium alloy, thes…
Fuse Diagram and Location on the Dodge Caravan
(Various brands) Caravan The vehicle is equipped with a fuse box located in the engine compartment next to the battery. The video shows the electrical diagram of the fuses. A…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos