Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change wheel bearings

Model: (Various brands) Various
Part: Bearing

In this video, see how to replace a wheel bearing. It is one of those parts that you immediately notice needing replacement due to the continuous noise they make while rolling. To proceed with the operation, you will need a 30 mm spanner to undo the hub nut and a fairly long lever. Turn until you can remove the hub and take out the disc. Then, using a piece of wood and a hammer, knock the bearing out of its seat. This operation is easier if you also change the discs, but it does not necessarily have to be done together, as the problem may not manifest simultaneously; therefore, it can also be done at two different times. You can easily find bearings for your car on any e-commerce site by typing in your car model, and the cost is reasonable: between £30 and £40.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Use a Bearing Puller
How to Use a Bearing Puller
(Various brands) Various Instructions for using the bearing puller. …
How to Adjust Wheel Camber
(Various brands) Various Wheel camber represents the tilt of the tyre itself, or more technically, it is the measure of the angle between the vertical and the centre plane of…
The reason why the steering wheel shakes (and how to fix it)
The reason why the steering wheel shakes (and how to fix it)
(Various brands) Various As we can see in the video, it is a common problem: if the tremor is felt at low speeds, the issue is probably related to the steering organs or the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos