Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to remove the rear lights on the Datsun 720 pickup?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Tail light
Operation: How to remove the rear lights on the Datsun 720 pickup?

In this tutorial, we can see how to remove the rear lights on the Datsun 720 pick-up truck, a very simple and quick operation to be performed in case we need to replace a bulb or the entire unit. Let's start by opening the cargo door, then unscrew the two bolts located along the inner edge of the taillight with an 8mm socket wrench. Once this is done, we grab the light, pull it towards us, and separate it from the body. At this point, we can disconnect the connector and proceed with the replacement of the damaged unit. To remove a bulb, it will be sufficient to rotate it slightly counterclockwise.


Posted on 2 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why aren't the rear lights of the Toyota Vitz working? Read Answer
    • Vari - Why does the rear light of the car not turn on? Read Answer
    • Vari - How much does it cost to replace the rear light on a car? Read Answer
    • Vari - How come the rear lights don't come on? Read Answer
    • Vari - How many reversing lights are there? Read Answer
    • Vari - What does code 16 mean on the Opel Adam? Read Answer
    • Vari - What is the meaning of code 16 in the Vauxhall Mokka? Read Answer
    • Vari - How to replace the headlights on the Opel 1700 Station Wagon? Read Answer
    • Vari - How do i change the bulb for the tail light? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos