Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Camshaft Oil Seal?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

The video author demonstrates his method for removing the camshaft oil seal without disassembling the entire affected area. The YouTuber, as we can see, initially drilled two holes in the oil seal with a diameter of 3 mm. He then inserted a wood screw with a diameter of 4 mm into each hole.

He first tightened the two screws by hand, then used a screwdriver to secure them better. Finally, with the aid of pliers, he removed the oil seal by pulling it from the screws, first from one side and then from the other.

This way, the oil seal was removed with great ease.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Install a Oil Seal
How to Install a Oil Seal
(Various brands) Various In this guide, you will learn how to install an oil seal. First, you need to remove the old ones. To do this, insert a flat-head screwdriver between …
How to Replace the Camshaft on a Single-Cylinder Engine
How to Replace the Camshaft on a Single-Cylinder Engine
(Various brands) Various If you need to carry out maintenance on a single-cylinder engine and check the camshaft, perhaps to replace it, follow these instructions: first, uns…
How to replace the engine crankshaft position sensor?
How to replace the engine crankshaft position sensor?
(Various brands) Various The engine crankshaft position sensor, also known as the camshaft and crank sensor, communicates the vehicle's speed to the ECU, allowing it to be di…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos