Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Glue a Rear View Mirror to a Car

Model: (Various brands) Various
Part: Rearview mirror

Video tutorial

To glue the rear view mirror, the video uses a specific adhesive from "Loctite" which includes a mesh and a cloth; clean the area where the mirror support will be positioned, outline the shape of the support on the glass to avoid misplacing it, cut the mesh to the shape of the support, spread the adhesive on the support, stick the mesh onto the adhesive and then attach it to the glass and wait 30 seconds for the adhesive to set on the glass.

After 30 seconds, you can leave the support, fix the mirror, and tighten the screw to hold it in place.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Reattach a Detached Interior Rear-View Mirror
How to Reattach a Detached Interior Rear-View Mirror
(Various brands) Various If the interior rear-view mirror detaches - this can happen due to vibrations - or breaks, perhaps because the plastic cracked and a deeper pothole o…
Removing the Car Rear-View Mirror
Removing the Car Rear-View Mirror
(Various brands) Various Is the car rear-view mirror damaged? Remove it from above the mirror and replace it. You can also repair it. Pry between the edge of the mirror frame…
How to Reattach a Detached Interior Rear-View Mirror
How to Reattach a Detached Interior Rear-View Mirror
(Various brands) Various It can happen that the interior rear-view mirror of the car becomes detached. In this case, you can reattach it by following the procedure below: tak…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos