Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair a Detached Roof Lining Without Removing It

Model: (Various brands) Various
Part: Checks and maintenance

A clever and economical solution to repair a detached roof lining without removing it. In fact, the lining cannot be re-glued, as cyanoacrylate glues would damage the fabric, and silicone would leave a permanent stain. The only proper method would be to remove everything and reupholster. However, there is this system: Buy these aluminium strips from a DIY store, which are used to divide floors; they are already pre-drilled, but we can further drill them and then bend them as needed. We use aluminium screws about 2 cm long, which should also be passed through the glue for added security. The result can be seen in the video.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair a Sagging Car Headliner
How to Repair a Sagging Car Headliner
(Various brands) Various A sagging headliner, or the upholstery covering the car's roof, looks quite unsightly. How can you repair it without excessive cost? Obtain a headlin…
Three Things Not to Do if the Car Headlining Fabric Has Come Loose
Three Things Not to Do if the Car Headlining Fabric Has Come Loose
(Various brands) Various This video tutorial explains three things not to do if the fabric of the car headlining (roof) has come loose. The first thing not to do: do not use …
How to Repair a Car Headlining
How to Repair a Car Headlining
(Various brands) Various If the headlining of your car has come loose and sagged, you can restore and reattach it. Refer to the instructions provided below and the video. Fir…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos