Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How do you turn on the fog lights of a Peugeot?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Fog lights
Operation: How do you turn on the fog lights of a Peugeot?

In order to turn on the fog lights of a Peugeot, you must follow the instructions below, which are valid for a good range of models of the brand. First, you need to insert the key and turn it to start the instrument panel: once it's on, you will need to rotate the switch located at the end of the lever on the left side of the steering wheel, so that the lights turn on. Once these lights are on, you can move the additional switch next to the one at the end of the lever: when the fog light icon appears on the instrument panel, it means that they are active.


Posted on 10 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - Why is the rear fog light of the Renault Sport Tourer not working? Read Answer
    • Vari - How do the fog lights come on? Read Answer
    • Vari - How to check the predisposition of the fog lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos