Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Lanos
    4. : How to replace car windshield wipers

(Various brands) Lanos - Video tutorial

Model: (Various brands) Lanos - Years 1997-2002
Part: Windscreen wipers
Operation: How to replace car windshield wipers

When it comes to replacing parts of your car, doing it yourself can be useful because it saves money to give to the professional. Windshield wipers are car components that require replacement over time, they wear out as they happen to be used when it rains. Their malfunction can jeopardize driving so it is essential that they are always in perfect condition. To replace the wipers, first of all you will have to buy new ones, they can be found in auto parts stores. After the purchase, the old windshield wipers are replaced with the newly purchased ones, then the wiper arm which is positioned on the windshield will be lifted. It will be necessary to turn the wiper over and notice a small lever that holds the arm in place, once found it will be pushed and then released downwards. Once this is done, it will be necessary to perform the same method to install the new blade, then it will be necessary to do the same with the other wiper, which will lead to the completion of the replacement.


Posted on 11 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos