Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Test a Starter Motor

Model: (Various brands) Various
Part: Starter motor

As our YouTuber says: "this system works for motorcycles, cars, trains, tanks, etc." So, there are no excuses. If you want to check if your starter motor works, follow this correct procedure: connect a ground cable to the negative terminal of the battery; then connect another cable to the starter motor terminal and to the positive terminal of the battery. When you touch the positive terminal of the battery, it should activate, as it normally does. It may also produce some sparks, which is normal.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to test a starter motor with external cables
How to test a starter motor with external cables
(Various brands) Various .. In this video we can see how to test a starter motor with external connection cables to the car. This video is focused only on.. …
How to Test the Starter Motor Without Removing It
How to Test the Starter Motor Without Removing It
(Various brands) Various Learn how to test a vehicle's starter motor without removing it. Lift the car and place it on axle stands: you will need two crocodile clips and an e…
How to Test a Starter Motor (Before Replacing It)
How to Test a Starter Motor (Before Replacing It)
(Various brands) Various Before replacing a starter motor, check that the problem is not elsewhere. Measure the voltage at the battery (it should be around 12.8 V). Try to st…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos